EQUIPPED WITH:
Reduced cleanout frequency due to its 750 cubic inch holding capacity.
Removes both ferous and non-ferous contaminants.
Accommodates water-based or oil-based liquids.
Feed cone accelerates fluid to bowl rotation improving separation efficiency.
Uses no paper media or cartridges.
May be started and stopped at any time without cleanout.
Self-draining feature automatically removes standing fluid from the centrifuge
bowl.
Sealed rotating assembly virtually eliminates premature bearing failure.
Snap-lock, swing-away cover permits easy access to centrifuge bowls.
High-capacity heavy-duty sludge liner is easily removed and cleaned.
The completely self-contained RCS System includes heavy-duty supply and feed
pumps, dirty tank with trash strainers, and a large clean tank. This high-
capacity liquid/solid separation device is provided fully assembled by
Waterlink. Also available with liquid-level controls, the system can be
installed with two simple connections.
The RCS is available in multiple configurations to accommodate flow rates as
high as 120 GPM. The modular design also permits the customizing of individual
systems to meet specific plant requirements. For example, a magnetic
preseparator for ferrous solids can be utilized on all models.
SPECIFICATIONS:
Maximum Flow: 30 GPM
Centrifuges with Drives: 1
Solids Capacity: 750 in3
Reservoir Capacity: 55 gals.
Feed Pumps: 3/4 HP
Supply Pumps: 1/2 HP
Length: 50"
Width: 24"
Height: 37 1/4"
Tank: 13"
Power Requirements: 230/460VAC, 3 Phase 60 Hz
Liquid Temperature Range: 35 Deg. F-165 Deg. F
Up to 30 GPM Flow Rate
55-Gallon Dirty/Clean Reservoir
Feed and Supply Pumps
